If youโ€™re in Kent, WA and planning to remove an old fence before installing a new one, this guide walks you through exactly what to expect for cost, timing, site prep, and questions to ask your fence installer. Whether you have 44 linear feet of chain link to tear out, a run of rotten wood posts, or concrete footings that need hauling away, knowing the common variables up front saves time and avoids surprise charges.

Why removal matters for a successful fence installation

Removing the old fence properly sets the stage for a long-lasting new fence installation. Leftover posts, footings, or soft spots in the soil will cause new posts to shift, leading to leaning panels, gate problems, and premature repairs. In Kentโ€™s damp soils, old post holes that hold moisture can accelerate rot in new wooden posts unless theyโ€™re addressed during removal.

Typical scope of a fence removal and haul-away job

- Detach and remove panels, rails, and gates. - Pull or cut out posts: some come out easily; others are set in concrete and require digging or cutting. - Break up and haul away concrete footings if requested. - Dispose of materials responsibly โ€” recycling metal where possible and hauling wood to an appropriate facility. - Backfill and compact holes or, if a new fence follows immediately, leave holes ready for new post installation per plan.

Cost factors homeowners in Kent should expect

1) Fence type and materials being removed: Chain link and metal panels are generally cheaper to remove than heavy wooden panel systems or decorative metalwork. Concrete footings add cost because they require breaking up and hauling.

2) Linear footage and number of posts: More length and more buried posts increase labor and disposal volume.

3) How posts are set: Posts set in concrete or very deep footings need more excavation time and often specialized tools. Old metal posts that are rusted in place can be time-consuming.

4) Accessibility and site conditions: Tight side yards, fences next to slopes, or properties with limited driveway access slow crews and raise labor time. If equipment must be hand-carried or extra protection for landscaping is needed, that shows in the price.

5) Disposal costs: Local tipping fees in King County and recycling options affect final cost. Removing treated wood or contaminated material may carry extra charges.

6) Whether you want footings removed or left in: Leaving old concrete footings in place reduces cost but may require special planning for the new post layout. Removing footings increases cost but gives a clean slate.

7) Permits and utility locates: Most removal work requires an accurate call to locate utilities before digging; if permit work is required for replacement, factor that into timeline and fees.

Typical price ranges (Kent, WA area estimates)

- Basic removal of chain link or light wood panels (easy access, no concrete footings): lower range per linear foot. - Removal including multiple concrete footings or deep-set posts: mid to higher range. - Complete teardown plus haul-away and site clean-up: upper range.

Exact numbers vary with scope; get a written estimate that breaks out labor, equipment, disposal, and any excavation or concrete demolition.

Realistic project timeline

- Site visit and estimate: 1โ€“7 days to schedule, depending on contractor availability. - Utility locate (Call Before You Dig): usually scheduled within a few days; required before digging. - Removal day(s): Small jobs (under 50 linear feet) can often be done in one day; larger or complicated jobs with footings may take 1โ€“3 days. - Follow-up for new fence installation: Many homeowners schedule removal and installation back-to-back. If soil needs settling after removal or if permits are required, installation may follow after a few days to a couple of weeks.

Prep checklist for Kent homeowners

- Mark the work area: clear space beside the fence for crews and a truck to park. - Move landscaping and valuables: pots, hoses, irrigation lines, and small plants should be moved or noted to the crew. - Check property lines and documentation: have your plat or property survey handy if available. If neighbor agreements are needed, resolve those ahead of time. - Schedule utility locates: the contractor will usually request this, but confirm itโ€™s scheduled before work begins. - Ask about permits: some replacements or removals that affect structures or setback areas may need permits; know who will pull them.

Questions to ask your fence company before removal

- Do you include hauling and disposal in the estimate? If not, what are the fees? - Will you remove concrete footings and post holes? If so, how deep will you dig and how will you backfill? - Can you coordinate utility locates and permits, or should I handle them? - What damage protection will you use for my yard, driveway, and landscaping? - Can you schedule removal and new fence installation consecutively? What if I want a delay? - Do you provide written warranties on the new installation and any reclamation work after removal?

Why hire a local Kent fence installer for both removal and new installation

A local company knows Kentโ€™s soil conditions, seasonal weather patterns, and typical permit rules in King County. They can recommend whether to fully remove footings or leave them, how to set new posts to avoid water pooling, and the best timing to avoid wet-season delays. Bundling removal and installation with the same crew usually saves time and reduces coordination headaches.

If youโ€™re ready to remove an old fence and get a new fence installation that lasts, Legendary Fence Company Kent can provide a site visit, transparent pricing, and a plan tailored to your yard and timeline.